标题: 这个要去找经销商解决吗 [打印本页] 作者: xczhu 时间: 2006-11-26 23:29 标题: 这个要去找经销商解决吗 这个要去找经销商解决吗
在你们公司测试没有问题,是你们在BIOS 第一项里已经把POWER SUPPLY 打开了,就是USER DEFINE 里-CPU CORE VOLTAGE 设置成为Default +10%这里也就是把CPU 电压升高到1.79-1.8V之间,而闪龙电压额定电压是1.6（V）,远远超了实际电压0.2V ,虽然有助于CPU在超频稳定性,对于一些主板可以提升CPU电压或者其他如加内存电压来解决兼容性问题,但是在保内的配件有问题不应该采取这种措施.这是对CPU及其他配件的寿命有严重的损坏,本计算机就是采用升高CPU电压解决此问题,如果调回去,装系统在安装过程中就出现蓝屏(不建议用GHOST安装此系统,因为问题得不到解决)
A problem has been detected and windows has been shut down to prevent damage to your computer
IRQL_NOT_LESS_OR_EQUAL
If this is the first time you’ve seen this stop error screen. Restart your computer .if this screen appears again,follow these steps: check to make sure any new hardware or software is properly installed .if this is a new installation ask your hardware or software is properly installed, if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need.
If problems continue,disable or remove any newly installed hardware or software disable BIOS memory options such as caching or shadowing.if you need to use safe mode to remove or disable components. Restare you computer. Press F8 to select advanced startup options, and then select safe mode technical information:
*** STOP: 0X0000000A (0X823FFFF0,0X00000002,0X00000001,0X804EB916)
Beginning dump of physical memory physical memory dump complete. contact your system administrator or technical support group for futher assistance.
把电压调回去,可以装完系统,但是发生和以前一样进入系统欢迎界面重新启动的情况,