近500Mhz外频。技嘉965P-DQ6就是Conroe的板王了。

gaolingsc

近500Mhz外频。技嘉965P-DQ6就是Conroe的板王了。
Even with the aforementioned BIOS issues, we were able to clock this board to an impressive 376FSB. Gigabyte has sent us test results with a new B2 stepping 6 X6800 showing a fully stable system running at 6X498 with the current D27 BIOS. The board ran extremely cool during our overclocking tests indicating a well engineered heat pipe system, although the area around the CPU would need to be actively cooled if a liquid cooling system is utilized. During testing for the maximum FSB clock we ran into the BIOS issues and were not able to extend past the reported 376FSB due to our inability to set the MCH and FSB termination voltages. The only other noticeable drawback in overclocking this board is the lock on increasing the CPU multiplier when utilizing the X6800. We look forward to providing a full review of this board in the near future.

http://www.anandtech.com/mb/showdoc.aspx?i=2797&p=8

技嘉内部测试结果6X498 with the current D27 BIOS

如果真的可以，那就再好不过了。

有人上过510...

anandtech也开始不厚道了
以前的每次测试,凡是涉及各主板之间性能对比的，都会给出CPU在该主板上的默认频率,这次却没给
有时候各主板一点点的差距就是这几MHz的默认频率不同造成的

但愿可以喽 可以就搞一块玩玩。

先上点甜点，非正式办X6800

全部默认电压：
466Mhz外频，490Mhz外频post





Not using any watercooling or LN2. The Gigabyte GA-965P-DQ6 with our ES X6800 runs at an amazing 466MHz FSB with a multiplier of 6. Imagine your RAM is running in SYNC at 1:1 to your CPU.. That is at default voltages with PCIe fixed at 100MHz. This is just an initial test, I am able to POST up to 6 x 490 but it isn't stable to go into WIN XP.

搞不懂，GIGA卖力出个975X的板子会比965的难超？价格卖得还高

原帖由 miaohw 于 2006-7-19 23:28 发表
主板芯片电压多少？ 这个很关键

全部默认电压

cpuz validation/ cpuz mobo screenshot都没有，谁知道是啥板子@.@